Universal Remote Control (URC-3220)
Features And Functions
Use the illustration below to locate feature on the One For All 3 Device Universal Remote Control (URC-3220) and then study the Key Charts (on the next two pages) to learn how they function.
To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 6.
Key Charts
When the LED (red light) blinks, the remote control is working and (after programming) is sending signals.
Press DVD/VCR, CBL/SAT, or TV once to select a desired home entertainment device to control. Also see the Device Table on page 6.
Press POWER once to turn on or off the selected device. For master power control, see Programming A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select channels (e.g., 009 or 031).
Use TV/VID to switch the TVs input to view TV or video programs.
Press ENTER once after entering the channel numbers on some TVs.
Use GUIDE to display your selected device’s program guide or setup menu.
Press MENU once to display your selected device’s main menu.
Use INFO to display the current channel and program or on-screen directory.
Use EXIT to exit from your selected device’s guide or menu.
Use the Cursor Keys to move the cursor in the program guide and menu screens.
Use SELECT (OK) to choose options from your selected device’s menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels, or after programming, to scan up to10 favorite channels.
Use CH + (or CH -) to select the next higher (or lower) channel.
Press SUBTITLE/CC once to display (or turn off) subtitles or closed captions, if available on your DVD player or cable/satellite service.
For a PVR (or DVR), press PVR MENU once to dis play a list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOL + (or VOL -) to raise (or lower) the sound volume.
Use REW, PLAY, FWD, PAUSE or STOP to control your VCR, PVR (or DVR), or DVD player.
For a DVD player, use SKIP F. or SKIP R. to view the next or previous chapter.
For a VCR, PVR (or DVR), or VOD (if available), use SCAN- or SCAN+ to quickly scan forward or back through a video program. Use REPLAY for an instant replay. Use QUICK SKIP to advance the video program a preset amount (as set on your device).
Press REC twice to record a VCR or PVR (or DVR) program.
Use SLEEP to set the sleep timer on a selected device if equipped with this feature.
Use SET for all programming sequences.
Device Table
NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 8.
After programming, the One For All 3 Device Universal Remote Control will be able to control the following types of devices:
| 